Voice control lets compatible 70Mai Dash Cam models perform selected actions from short spoken commands. Available commands, languages, and settings vary by model, region, and firmware, so use the command wording supported by your specific dash cam.

How Voice Commands Work

Voice control is based on a defined set of supported phrases rather than free-form conversation. When the dash cam is operating, it listens for a recognized command and performs the matching action.
- Make sure voice control is available and active for your dash cam.
- Use the supported voice language.
- Speak the predefined command clearly.
- Listen for voice feedback or check the device indication when your model provides confirmation.
Adding extra words or substantially changing a command may prevent recognition. For example, a short supported phrase is more reliable than turning it into a longer conversational request.
Before Using Voice Control
[checklist] * Voice control is supported by your 70Mai Dash Cam model * The dash cam is powered on and operating normally * The selected system or voice language supports the command you plan to use * You know the exact or supported wording for your model * The dash cam microphone area is not blocked * Cabin noise is low enough for your voice to be heard clearly [/checklist]Voice settings and supported languages can differ between models. Some settings may be available from the dash cam itself, while configuration options available through the 70mai app can also vary.
[note] On some 70Mai Dash Cam models, voice control is unavailable while the dash cam is actively connected to the 70mai app. If commands behave differently during an app connection, disconnecting from the device session may be relevant for that model. [/note]Voice Command Quick Reference

The following phrases represent common command patterns across different 70Mai Dash Cam models. They are examples rather than a universal command list.
Protect Important Footage
Voice control can provide a quick way to protect an important road event without reaching for the dash cam.
- “Lock video”
- “Lock the video”
- “Emergency video”
- “Save this video”
A supported protection command typically creates or marks an emergency recording so the event is separated from ordinary loop-recording footage.
This can be useful after:
- A dangerous cut-in or other road incident.
- A near-miss without an impact.
- An unusual road event that may be useful to review later.
Take a Photo
A supported photo command captures a still image of the current camera view while allowing normal dash-cam use to continue.
- “Take photo”
- “Take a photo”
- “Take picture”
Photo capture can be useful for recording road conditions, signs, or another scene you may want to find quickly later. If you need to capture a specific vehicle or license plate, do so only when the driving situation allows you to remain fully focused on the road.
Audio Recording
Some 70Mai Dash Cam models support spoken control of the recording microphone.
- “Turn on audio”
- “Turn off audio”
- Other models may use equivalent sound-recording phrases.
Audio control can be useful when you prefer not to record conversations inside the vehicle.
Screen Control
Models with a display may provide voice commands for managing the screen while recording continues.
- “Screen off” or a similar supported phrase can turn the display off.
- “Screen on” or a similar supported phrase can wake the display.
Turning the display off can reduce visual distraction during night driving without necessarily stopping normal recording.
Other Model-Specific Commands
Some 70Mai models provide additional voice actions beyond photo, video, audio, and screen control. Depending on the model, these may include:
- Switching between supported front and rear camera views.
- Turning the dash cam Wi-Fi hotspot on or off.
- Triggering a particular recording action.
- Using camera-view or special capture functions.
- Other commands introduced for a specific model, region, or firmware version.
Rear-camera voice actions depend on a compatible rear camera being installed and connected when the model requires it.
Language and Command Matching
Voice recognition depends on both the supported language and the exact command set. A dash cam can have a multilingual interface without supporting voice commands in every displayed language.
[dosdonts] Do: Use the voice language supported by your dash cam Do: Speak the command as a short, distinct phrase Do: Recheck the available command list after major device or firmware changes Dont: Assume every 70Mai model recognizes the same phrases Dont: Add unnecessary words to a fixed command Dont: Assume changing the interface language automatically adds voice support for that language [/dosdonts]Improve Recognition
Use Short, Supported Phrases
Fixed commands usually work better when spoken without extra words. If your model expects a phrase such as “Take photo,” use that phrase rather than a longer sentence such as “Can you take a photo now?”
[tip] Learn the few commands you actually use and say them consistently. This is usually easier than trying several alternative phrases while driving. [/tip]Reduce Background Noise
Music, podcasts, wind, passengers, and loud traffic can make spoken commands harder for the dash cam to detect.
- Keep media volume moderate when you plan to use voice control.
- Open windows can add significant wind noise at higher speeds.
- Very noisy conditions such as sirens or construction may reduce recognition.
Keep the Microphone Area Clear
The microphone should not be obstructed by accessories, stickers, hanging objects, cloth, or other material around the dash cam.
- Keep visible microphone openings free of dust and debris.
- Avoid covering the dash cam body with fabric or decorative items.
- Speak clearly from your normal driving position rather than leaning toward the device.
Use Voice Control While Driving
The main value of voice control is reducing the need to reach for buttons or a screen. It should not become another distraction.
[warning] Keep your attention on driving. Do not look away from the road repeatedly to confirm a voice command or keep retrying a command during a demanding traffic situation. [/warning] [dosdonts] Do: Speak at a normal, clear volume Do: Rely on audible or simple device confirmation when available Do: Try the command again later if the driving situation requires your full attention Dont: Shout repeatedly at the dash cam Dont: Reach for menus while driving just because a command was not recognized Dont: repeatedly test voice commands during heavy traffic or another demanding situation [/dosdonts]After App or Firmware Changes
Voice-control behavior may change with the dash cam model, firmware version, system language, region, or available device settings. Updates can also change which commands or language options are available.
After an update, it can be useful to check:
- Whether voice control is still available and enabled.
- Whether the selected language is appropriate for voice commands.
- Whether the displayed or documented command wording has changed.
- Whether voice commands can be used while the dash cam is connected to the app.
Basic Voice-Control Checks
[troubleshoot] Problem: No voice commands are recognized Cause: Voice control may be unavailable or disabled, the selected language may not support the spoken command, the phrase may not match the model, or an active app connection may affect voice control on some models Fix: Check the model's available voice settings and language, use its supported phrase, and try again when the dash cam is operating normally Problem: Commands are recognized only sometimes Cause: Music, wind, traffic noise, distance, speech clarity, or an obstructed microphone may interfere with recognition Fix: Reduce background noise when practical, keep the microphone area clear, and speak the supported phrase clearly from the normal driving position Problem: A different action is triggered Cause: A conversation or similar-sounding phrase may resemble one of the dash cam's supported commands Fix: Use short, distinct command wording and disable voice control when practical if accidental triggers occur frequently [/troubleshoot]Privacy and Audio
Voice control requires the dash cam to detect supported spoken commands. This does not mean every model behaves like a general-purpose conversational voice assistant.
For practical privacy control:
- Disable voice control if you prefer not to use spoken operation.
- Use audio-recording controls when supported if you do not want cabin conversations included in video recordings.
- When another person drives the vehicle, make them aware if dash-cam audio recording or voice-control features are active.
Build a Simple Command Habit
You do not need to memorize every available command. Start with the actions that are most useful during normal driving.
[reference] Title: Protect Footage Text: Learn the exact emergency or video-lock phrase supported by your model. Title: Capture a Photo Text: Learn the supported photo command for quickly saving a still image. Title: Reduce Screen Distraction Text: If your model supports display voice control, remember its screen-off command for situations such as night driving. [/reference]Practicing these commands while the vehicle is safely stationary can make them easier to recall later. A consistent phrase also reduces the temptation to try several different commands during an unexpected road event.
[faq] Q: Do all 70Mai Dash Cam models use the same voice commands? A: No. Supported commands and exact wording vary by model, language, region, and firmware. Q: Can voice control protect an important recording? A: Compatible models can use a supported emergency or video-lock command to create or protect event footage. Q: Can voice control turn audio recording off? A: Some models support audio on/off commands. Availability depends on the model. Q: Can I turn the display off without stopping recording? A: Some models with screen-control commands can turn the display off while normal recording continues. Q: Why does a command work before connecting to the app but not during the connection? A: Some 70Mai models do not support voice commands while actively connected to the 70mai app. Q: What should I do if recognition is unreliable? A: Confirm the exact supported phrase and language, reduce background noise when practical, and keep the microphone area unobstructed. Q: Can firmware or settings change the available commands? A: Yes. Available commands, languages, and behavior can vary with the model and software version, so recheck the command options after significant changes. [/faq]